TFG3630 Synthesized Signal Generator, 25MHz to 3GHz Signal Generator

    Frequency resolution: 3Hz
    Unlimited measurement range: digital setting directly for the whole range.
    Non-intergraded process: up to the stable value immediately when switching, continuous signal phase and amplitude without deflection.
    Sweep characteristics: with the function of frequency sweep and power sweep. Start point and stop point can be set arbitrarily.
    Modulation characteristics: pulse modulation signal with user-defined can be output.
    Operation mode: key operation, TFT-LCD interface, direct digital setting, continuous adjustment by knob.
    High reliability: large scale integrated circuit, SMT, high reliability and long service life.
    Communication port: USB device , RS232 and GPIB (optional)

    Specifications
    Frequency 
    Range
    25MHz~3GHz
    Resolution3Hz
    Accuracy
    ±5ppm
    Stability
    1×10-7
    Reference Frequency
    Reference Output:
    Frequency: 10MHz
    Level: >0dBm
    Port: BNC connector

    Reference Input:
    Frequency: 10MHz
    Power: -3 ~+7dBm
    Input Port: BNC connector
    Impedance(nominal): 50Ω
    Phase Noise
    -90dBc~-115dBc Offset20 kHz
    Spurious
    Harmonic: <-35dBc (Power: ≤-5dBm)
    Non-harmonic: <-60dBc
    Amplitude
    Power Range
    -60dBm~+10dBm
    Resolution
    0.25dB
    Accuracy
    ±(1.0+2% absolute value of setting value)dB     
    (output frequency 25MHz~2250MHz)
    ±(1.0+4%  absolute value of setting value)dB      
    (output frequency 2250MHz~3000MHz)
    Input SWR (Standing-wave Ratio)
    < 1.5 typical value
    RF Output
    Terminal: N type
    Output Impedance: 50Ω
    Pulse Modulation
    Break-make Ratio
    > 80dB
    Rising/Falling Time
    < 100ns
    Pulse Width
    0.25s  Min.
    Pulse Period
    0.5s  Min.
    Sweep
    Frequency Sweep
    Sweep Mode: Linear
    Min. Step: 3Hz
    Power Sweep
    Sweep Mode: Linear
    Min. Step: 0.25dBm
    General Characteristics
    Display
    Resolution: 480×272
    Size: 4.3 inch
    Language
    Chinese and English
    Power
    Voltage: 200V ~ 240V
    Frequency: 50(1±5%) Hz
    Power Consumption: <20W
    Warm-up: 30 minutes
    Environment and Dimensions
    Working Temperature: +10°C ~ +40 °C
    Storage Temperature: -40°C~ +70 °C
    Relative Humidity: ≤80%
    Weight: <5 kg approx.
    Dimension: 386mm×256mm×123mm (Length × Width × height)


评论

发表评论

此博客中的热门博文

How To Facilitate The Observation Of Small Signals?

图片
How to set up the high sensitivity of the  Spectrum Analyzers  to facilitate the observation of small signals? A: first, set the corresponding center frequency sweep width (span) and reference level according to the size of the small signal under test;Then, the attenuation value is gradually reduced in the absence of any overload warning in the spectrum analyzer.If the SNR of the measured small signal is less than 15db, RBW will be gradually reduced. The smaller RBW is, the lower the base noise of the spectrum analyzer will be, and the higher the sensitivity will be. If the spectrum analyzer from  Spectrum Analyzer Supplier  has pre-amplifier, opening pre-amplifier and pre-release can improve the noise coefficient of the spectrum analyzer, thus improving the sensitivity. For small signals with low signal-to-noise ratio, it can reduce VBW or adopt trajectory average to smooth the noise and reduce fluctuation. It should be noted that the measurement result o...
阅读全文

What is the application of signal generator

图片
A  signal generator  is a device that provides electrical signals of various frequencies, waveforms and output levels. Signal generator, signal modulation functions: signal modulation refers to the modulated signal, amplitude, phase or frequency change of the carrier signal frequency information is embedded into the high frequency, the signal can be transmitted from voice to data, and to any video signal. Signal generator has a wide range of applications in the field of production practice and technology. We can also supply the high quality  Universal Frequency Counter,   Digital Multimeters  etc. If you need, welcome to contact us.
阅读全文

Power Quality Analysis Method

图片
We are a leading  Power Quality Analyzer China  Supplier. Today , let we tell the Power quality analysis method. Power quality is a very important part of the future power grid construction. Nowadays, the transformation of distribution network and the upgrading of rural power grid are in full swing, and the quality of power is also receiving much attention. The power quality problems caused by various disturbances in the power system can be mainly divided into two categories: steady state events and transient events. Steady-state power quality problems are characterized by waveform distortion, including harmonics, interharmonics, waveform sags, and noise. Transient events are usually characterized by spectrum and transient duration, which can be divided into pulse transients and oscillations. Two major categories. The analysis methods of power quality are mainly time domain simulation methods, frequency domain analysis methods and transformation based methods. In fact, ...
阅读全文